Material platform — Full TDS Available
Cannabis sativa L. (industrial)
A natural fiber platform with potential for reinforcement, technical textiles and composite applications.
Key properties
Development status
Full TDS Available
Section 01
Industrial hemp is a bast fiber extracted from the stem of Cannabis sativa L. Its long, aligned cellulose bundles are what make it structurally interesting: it is the platform Tenzyle reaches for when the requirement is reinforcement rather than insulation.
Its tensile performance places the fiber in a range where it becomes a credible candidate for load-path components that have historically defaulted to glass-fiber reinforcement — with a materially different end-of-life and carbon profile. Tensile values are available on request.
In practice, hemp is engineered into aligned or randomly-oriented reinforcement mats, or blended with other platforms where a balance of stiffness and formability is required. Composite performance is always a function of the matrix, orientation and process, so Tenzyle validates at the laminate level rather than relying on fiber values alone.
Section 02
Only characteristics supported by completed characterization work are listed. Properties still under test are marked as specification to be provided in the table below.
Tensile performance makes hemp the primary structural reinforcement platform in the Tenzyle portfolio. Values are available on request.
Long aligned bast bundles carry load efficiently along the fiber axis in composite laminates.
Processable into aligned and random-orientation reinforcement formats for bio-based matrix systems.
A fast-cycling annual crop, giving a shorter feedstock renewal cycle than woody or mineral alternatives.
Section 03
Values are stated only where testing is complete and a method can be named. Tenzyle does not publish estimated or indicative figures.
Technical parameter
Value
Method / standard
Material type
Natural bast fiber (stem)
—
Fiber structure
Aligned multicellular bast bundles
—
Tensile strength
Available on request
—
Density
Technical specification to be provided.
—
Fiber length
Technical specification to be provided.
—
Moisture behaviour
Technical specification to be provided.
—
Thermal performance
Technical specification to be provided.
—
Where a parameter reads “Technical specification to be provided” or “Available on request”, characterization for that property is either in progress or released under a technical engagement.
Section 04
Mechanical characterization of the hemp platform is complete and published in the technical data sheet. Laminate-level validation is performed per application.
Tensile performance characterized and published in the TDS.
Composite validation is carried out at laminate level against the partner’s matrix and process.
Thermal and moisture characterization is in progress; values are withheld until testing is complete.
Section 05
Application areas where the Hemp platform is currently evaluated or specified.
Reinforcement without the glass-fiber default
Mass reduction without a synthetic default
Building materials that hold their thermal case over time
Where the requirement does not fit an existing category
Section 06
Fiber
Nonwoven
Blend
Engineered Material
Format availability is confirmed at engagement level. Volumes and lead times are quoted against a defined specification.
Section 07
Hemp Technical Data Sheet
The full technical data sheet lists measured values with the test standard applied to each. It is released on request to technical and procurement teams.
Section 08 — Custom engineering
Share your application and performance requirements and our team can assess the appropriate material platform.
Section 09
Platforms frequently evaluated alongside this one, either as an alternative or as a blend component.
Coarse, durable fibers under assessment for geotextile, matting and industrial packaging applications.
DurabilityReinforcementIndustrial Potential
Agricultural by-product fiber under assessment for structural composite and nonwoven reinforcement applications.
Natural FiberAgricultural ResourceReinforcement
Fiber combinations formulated to an OEM’s target density, tensile and thermal specification.
Custom FormulationPerformance OptimizationApplication Specific
Technical questions
A Technical Data Sheet (TDS) is a document listing a material’s measured properties, the test standard each value was measured against, and the conditions of the test. A TDS is what allows an engineering team to specify a material. Tenzyle publishes a TDS only for platforms where testing is complete.
In Validation means characterization and testing work is in progress for that platform and performance values have not yet been finalised. Technical data for platforms in validation is shared on request under a technical engagement, with the state of the work made explicit.
Natural fiber composites are materials in which a natural fiber provides the reinforcement phase within a polymer matrix. Composite performance is a laminate property — it depends on the fiber, the matrix, the fiber orientation and the processing route — so Tenzyle validates at laminate level rather than deriving part performance from fiber values alone.
Material validation is the process of confirming that a material meets defined acceptance criteria under the conditions of its intended application. It differs from characterization, which establishes what a material’s properties are. Validation establishes whether those properties are sufficient for a specific use.
Through the technical brief form. Technical data sheets are released for characterized platforms, and engagement-specific data is shared under a technical discussion. Where a property has not been tested, Tenzyle records it as specification to be provided rather than publishing an estimate.