HomeMaterialsNatural Latex

Material platform — Full TDS Available

Natural Latex

Hevea brasiliensis

A flexible bio-based material platform with potential for cushioning, elastic and flexible material systems.

Close-up of a pale amber natural latex open-cell foam block

Key properties

Development status

Full TDS Available

Section 01

Material overview

Natural latex is the portfolio’s elastomeric platform — a renewable, tapped input rather than a harvested fiber. It is the material Tenzyle uses when a construction needs recovery: the ability to deform under load and return.

Functionally it complements the fiber platforms rather than competing with them. Fibers provide loft, insulation or reinforcement; latex provides the elastic behaviour that turns a fiber batt into a cushioning or damping system.

It is most often specified in combination — as a binder, a backing, or a matrix phase in flexible engineered constructions.

Section 02

Key properties

Only characteristics supported by completed characterization work are listed. Properties still under test are marked as specification to be provided in the table below.

P.01

Elastic recovery

Recovers form after deformation, which is the basis of its cushioning and damping behaviour.

P.02

Flexibility

Remains conformable across a wide deformation range, suiting flexible engineered constructions.

P.03

Renewable input

Tapped from living trees rather than extracted as a petrochemical feedstock.

P.04

Combination platform

Used as a binder, backing or matrix phase alongside Tenzyle fiber platforms.

Section 03

Technical specifications

Values are stated only where testing is complete and a method can be named. Tenzyle does not publish estimated or indicative figures.

Technical parameter

Value

Method / standard

Material type

Bio-based natural elastomer

—

Structure

Open-cell foam and sheet formats

—

Density

Technical specification to be provided.

—

Compression behaviour

Technical specification to be provided.

—

Thermal performance

Technical specification to be provided.

—

Mechanical performance

Technical specification to be provided.

—

Where a parameter reads “Technical specification to be provided”, characterization for that property is either in progress or scoped to a partner engagement.

Section 04

Performance & validation

Supplied as a characterized elastomeric input. Construction-level performance is validated per application with the partner.

Full TDS Available
Development stage

Material data sheet available on request.

Compression and recovery behaviour validated per construction, not published generically.

Combination behaviour with fiber platforms assessed during engineering.

Section 06

Available formats

Engineered Material

Blend

Format availability is confirmed at engagement level. Volumes and lead times are quoted against a defined specification.

Section 07

Technical data

Natural Latex Technical Data Sheet

The full technical data sheet lists measured values with the test standard applied to each. It is released on request to technical and procurement teams.

Section 08 — Custom engineering

Need a specific performance profile?

Share your application and performance requirements and our team can assess the appropriate material platform.

Technical questions

How to read Tenzyle material data

What is a Technical Data Sheet?

A Technical Data Sheet (TDS) is a document listing a material’s measured properties, the test standard each value was measured against, and the conditions of the test. A TDS is what allows an engineering team to specify a material. Tenzyle publishes a TDS only for platforms where testing is complete.

In Validation means characterization and testing work is in progress for that platform and performance values have not yet been finalised. Technical data for platforms in validation is shared on request under a technical engagement, with the state of the work made explicit.

Natural fiber composites are materials in which a natural fiber provides the reinforcement phase within a polymer matrix. Composite performance is a laminate property — it depends on the fiber, the matrix, the fiber orientation and the processing route — so Tenzyle validates at laminate level rather than deriving part performance from fiber values alone.

Material validation is the process of confirming that a material meets defined acceptance criteria under the conditions of its intended application. It differs from characterization, which establishes what a material’s properties are. Validation establishes whether those properties are sufficient for a specific use.

Through the technical brief form. Technical data sheets are released for characterized platforms, and engagement-specific data is shared under a technical discussion. Where a property has not been tested, Tenzyle records it as specification to be provided rather than publishing an estimate.